| HousAll Product Features
Because it makes a difference |
| Product Specifications |
|---|
| Product Specifications | | HousAll Specifications
Category
HousAll 12
HousAll 16
Feature, Function and Benefit
Width
Standard 12 feet (3.66 metres) wide.
Standard 16 feet (4.88 metres) wide.
Fully useable space side to side with greater than 6 feet (1.83 metres) of headroom throughout.
Length
Standard 16 feet (4.88 metres), modular design grows in common 4 foot (1.22 metre) sections.
Standard 24 feet (7.32 metres), modular... |
|
| Optional Accessories |
|---|
| Solar Kit | | Under Development
The HousAll Solar Power Kit will consist of a flexible, thin film amorphous, solar collector panel custom fit to securely mount on top of a standard HousAll roof panel, a power conduit/delivery systems, a Nickel Metal Hydride storage system and a power management system capable of supplying either AC or DC power.
The HousAll Solar Kit is completely scalable and may be added to at any time enabling it can grow as demand... |
| Air Conditioning Rack | | The HousAll Air Conditioning Rack allows a standard window mounted Air Conditioning Unit to be installed in an end wall. The Rack is made from sixteen (16) gauge, bright zinc coated steel. |
| Interior Shade Fly |  | The HousAll Shade Fly is designed to install on the inside of the unit such that it traps ‘sun heated’ air in the top of the unit and then exhausted out of the HousAll Vents located at the top end of each unit. Interior installation means that the Fly will not wear out due to sun, rot, rain or wind damage. |
| Winter Kit |  | The HousAll Winter Kit consists of a series of insulated panels that fit into place on the interior surfaces of the HousAll Panels and boosts the insulation value of the HousAll from R4 to R10.
Each panel is held in place with supplied brackets that snap fit anywhere to the HousAll Frame. It takes two people approximately thirty (30) minutes to install in a family sized unit.
Currently this product is on back order. |
| Room Divider |  | Under Development
The HousAll Room Divider is made of Fire Resistant, rip-stop fabric that is screened top and bottom for air flow with a privacy screen in the middle.
The Divider may be split like a curtain and secured at the sides when not in use. It has ties in the middle to allow the user to secure it in a closed position. |
| Stove Pipe Fitting |  | The HousAll Stove Pipe Fitting allows the user to install a standard six (6) inch, or, fifteen (15) centimetre chimney pipe safely through the end wall with no risk of fire due to chimney heat.
The Stove Pipe Fitting is made of sixteen (16) gauge, fire painted, galvanized steel and properly installed is water and weather proof. |
| Overhead Storage System |  | The HousAll Overhead Storage System consists of light weight, heavy duty webbed netting that may be secured between the HousAll roof arches. |
| Anchoring System | | The HousAll Anchoring System consists of a set of two, sixteen (16) gauge, galvanized steel, ‘u’ shaped brackets per section and four heavy duty, fourteen (14) inch, or, thirty five (35) centimetre, galvanized steel spikes that are intended to be staked into the ground at cross angles.
Alternatively, the brackets may be screwed to a wooden floor or lag bolted into a concrete base. |
| Floor Kit |  | The HousAll Floor Kit is designed to keep roughly three (3) inches, or, eight (8) centimetres of water out of the HousAll during torrential downfalls of rain.
The Floor Kit consists of a heavy gauge, woven poly tarp, cut to fit and metal strapping for each section side. The strapping allows the poly tarp to be stretch fit and held securely in place in order to stop wandering and resulting wear and tear. |
| Double Bunk/Work System |  | The HousAll Double Bunk/Work System is modular and designed to serve multiple applications.
Legs:
The legs are attached to the frame, one set of four (4) legs per eight (8) foot section, and are designed to accept/support various devices in multiple locations up and down each leg. Each leg has an extendable foot pad to allow for installation and proper support on uneven ground. The legs are designed to support a maximum of two bunks per... |
|
| Design Validation and Testing |
|---|
| Validation and Testing |  | HousAll Design Validation and Environmental Testing
The HousAll Shelter System was and is still being put through exhaustive testing to confirm and improve upon the integrity of the design, the materials used and its ability to withstand the environment, these tests included; water/rain, wind, snow load, heat, cold and ultra-violet radiation.
Materials:
In regard to materials, the HousAll Shelter System is composed of rust resistant steel and... |
|
| Environmental Impact |
|---|
| Environmental Impact |  | Environmental Responsibility
HousAll Systems Corporation has a strategic policy to minimize its environmental footprint as exhibited throughout its product designs, green friendly materials used and the way they are manufactured.
Design:
1) Footprint –Unlike other shelters, the HousAll requires no land beyond its footprint, creating less impact on the ecosystem. Most other shelters require a footprint... |
|
|